Question: How Do I Reset My Axis Camera To Factory Settings?

How do I reset my axis camera password?

There is no possibility to find the password.

If the password is lost, the Axis product needs to be reset by restoring the factory default settings and re-configured.

Instructions on how to perform a factory default can be found in the Installation Guide/User’s Manual for your product..

How do I reset my AXIS m3045 V?

To reset the camera to the factory default settings:Disconnect power from the camera.Press and hold the control button while reconnecting power.Keep the control button pressed for 15–30 seconds until the status LED indicator flashes yellow.Release the control button.More items…•

How do I connect my axis camera?

Configuring an Axis CameraConnect the camera. Connect the Axis camera to the computer using an Ethernet cable. … Configure computer IP address. Set your computer’s IP address to 192.168. … Launch the Setup Axis Camera Tool. … Setup the Camera. … Manual Camera Configuration. … Setup Page. … Configure Users. … Configure Image Settings.More items…•

How do I reset my WIFI camera?

You need to reset the cameras by pressing the reset button on the bottom of the cameras for 10 seconds (led red flashing means reset is complete). After resetting the cameras, you need to plug ethernet cable inside the camera’s connectors and connect it to the new router. Delete the cameras in the “Added device.”

How do I reset my AXIS p3225?

Camera Orientation Depending on how the Axis product is installed, select ceiling or wall . To change these settings, the product must be restored to the original factory default settings. To reset or restore the product, go to Setup > System Options > Maintenance in the product’s web pages.

How do I reset my IP camera to factory settings?

Press and hold the Reset button (SW1) on the board with your finger while reconnecting the power. Keep the Reset button (SW1) pressed for about 2 seconds. Release the Reset button (SW1). The network camera resets to factory defaults and restarts after completing the factory reset.

What is the default username and password for Axis cameras?

The default user of an AXIS product is “root” and previously the default password was “pass”.

What is the default IP address of AXIS Camera?

The camera’s default IP-address (192.168. 0.90) can be used to configure it. Follow the instructions below: Reset your Axis camera or video encoder to the factory defaults as described in the Installation Guide.

What is the default password for Avigilon cameras?

The camera’s default username and password is administrator without a password. It is recommended that you add a password as soon as possible to avoid security issues.

What port do Axis cameras use?

AXIS Camera Station server to devicePortNumberProtocolMain HTTP and HTTPS ports80 & 443TCPDefault bonjour port5353UDPDefault SSDP port1900UDPDefault WS-Discovery port3702UDP